US Fireplace Products, Inc.: Energy Top Fireplace Damper

Manufacturers of SEAL-TIGHT and ENERGY TOP Fireplace Dampers

How the ENERGY TOP

Damper works:

ENERGY TOP is attached to the top of the chimney's flue tile liner. In the closed position, above, it is virtually invisible from the ground. Provides a tight, gasketed fit that seals in your heat and seals out weather, insects, birds and animals.

A slight pull on the chain releases the spring-loaded top into the open position. When open, this damper design is least obstructive to exiting smoke.

ENERGY TOP dampers are EASY to operate! The bracket is attached to the fireplace wall, keeping the handle easily accessible. A slight pull opens and closes the damper.

The ENERGY TOP Damper is a low-profile top mounted damper that also serves as a chimney cap.

Heat loss up the fireplace chimney accounts for an average 8% of your home heating costs! Energy Top Dampers help prevent this heat loss. Stay warmer and save money!

Here's a video to

see how it works!

Four Season Protection for your chimney. When closed, the damper

	In the closed position, above, the Energy Top serves as a chimney cap.
	Energy Top damper shown in the open position when the fire is burning.

seals in your heat and air conditioning, seals out birds, animals and insects.

Serves as a chimney cap when closed

Replaces leaky throat dampers

Easily accessible handle mounts inside of fireplace

Precision engineered mechanism is easier to open and close than throat dampers

The practical solution to upgrading fireplace chimneys in older houses that never had a damper installed previously

Constructed of stainless steel and aluminum so components will not rust or corrode

Always opens to a pre-set height

Defaults to open position for maximum safety

Lifetime Warranty

The ENERGY TOP damper attaches to the top of the flue tile on fireplace chimneys. Our models are sized by common flue tiles and available in 6 Sizes:

Model Size	Fits Inside Flue Sizes
8 " x 8"	7" x 7" to 10" x 10"
8" x 17"	7" x 15" to 10" x 18"
9" x 13"	7" x 10" to 10" x 13"
13" x 13"	10" x 10" to 13" x 13"
13" x 18"	10" x 15" to 13" x 18"
18" x 18"	15" x 15" to 18" x 18"

Each damper kit includes:

-50' cable which can be cut to adjust for perfect fit; fireplace bracket and cool-touch spring handle

-Mounting adhesive and hardware

Optional Accessories:

-50 replacement cable

-4' cable shield (protects cable inside chimneys with offsets)

ENERGY TOP Dampers are made for use only with open burning masonry fireplace chimneys and are NOT suitable for use in these installations:

Don't use on chimneys serving vented gas logs. Vented gas logs require the fireplace damper to be removed completely or fixed to a permanently open position; this is to assure that soot, fumes and carbon monoxide do not enter your home.

Don't use on chimneys serving wood stoves or other appliances such as inserts, furnaces, etc.

INSTALLATION

Energy Top Dampers can be installed by homeowners who feel comfortable working on a roof, but U.S. Fireplace Products Inc. strongly recommends you use the services of a qualified chimney sweep who can also inspect your chimney and provide other valuable home safety services.